Ryobi RCS3535B Chainsaw Manual

The Ryobi RCS3535B is a powerful electric chainsaw designed for efficient cutting and trimming of trees and branches. It features a 35cm bar length, a robust 2000W motor, and a lightweight design for easy handling. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful motor, automatic chain lubrication, and a safety switch to prevent accidental starts.

Feature	Description
Bar Length	35 cm for efficient cutting
Motor Power	2000W for high performance
Chain Lubrication	Automatic system for smooth operation
Weight	Lightweight design for easy handling
Safety Features	Includes a safety switch and hand guard

Safety Information

Always wear protective gear, including gloves, goggles, and ear protection. Ensure the area is clear of obstacles before operating the chainsaw.

Read the manual thoroughly before use.
Keep hands and feet away from the cutting area.
Do not operate in wet conditions.
Ensure the chainsaw is properly maintained.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the chainsaw, ensure it is plugged in and the chain is properly tensioned. Follow the steps below:

Check the oil level and fill if necessary.
Press the safety switch and pull the trigger to start.
Guide the chainsaw along the cutting line.
Release the trigger to stop the chainsaw.

CAUTION! Always ensure the chainsaw is turned off when not in use.

Specifications

Model: RCS3535B
Bar Length: 35 cm
Motor Power: 2000W
Weight: 3.5 kg
Chain Type: 3/8 inch pitch
Lubrication: Automatic
Power Source: Electric

Maintenance

Regular maintenance is essential for optimal performance. Follow these steps:

Clean the chainsaw after each use.
Check and adjust the chain tension regularly.
Replace the chain if it becomes dull or damaged.
Inspect the power cord for any damage.

CAUTION! Always unplug the chainsaw before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chainsaw won't start	Power supply issue	Check power cord and outlet.
Chain is not moving	Chain tension too loose	Adjust the chain tension.
Excessive vibration	Chain is dull	Sharpen or replace the chain.
Oil leaking	Oil reservoir overfilled	Drain excess oil.

Reset: If issues persist, consult a professional.